The process of oak furniture collection

(Material selection/mortise joint/assembly/surface treatment, etc.)
1. Material selection. (Just oak, there are also three to fifty-nine equal points, so in the selection of materials will also be strictly checked, there can be no color difference.)
2, because oak is a hard material furniture material, in the production of furniture, the structural treatment must use the male and female tenon structure, round rod tenon structure strength is not enough, so it should be avoided.
3, furniture production common sense, experienced carpentry master all understand, furniture ancestral teachings once said "furniture does not fall, equal to the craft has not learned" furniture production essentials, its original meaning is, no matter the production of any furniture, furniture corners should be inverted R Angle, commonly known as "rounded corner".
4, furniture chamfering, especially oak furniture collection, due to the hard material, often inadvertently will bump into the human body, moreover, each of our families will have a baby in the room to play skin activities, so in the production of oak furniture collection, must be more prominent corners rounded, to prevent injury to the human body, such as: Table corners, tea table corners, TV cabinet corners, etc., of course, furniture chamfering does not only refer to oak, other furniture is the same.
5, the production of oak furniture collection, must use after drying and moisture balance of the wood, not more than 9 ~ 11%, more than this moisture content, soon done furniture will appear cracking deformation and other phenomena.