https://www.selleckchem.com/pr....oducts/ly3537982.htm
Relatively large differences between the reference and measured values were observed for the OAR at large off-axis distances (5 cm) and for the OF for small fields (3 × 3 cm ). The optimal DLG correction factor was 0.6 ± 0.3 (range 0.3-1. with small-field plans and 0.2 ± 0.2 (0.0-0.5) without them. A reasonable agreement was found between the vendor-provided reference and measured beam models. DLG optimization results were dependent on the selection of the VMAT plans, requiring careful attention to the known dose calculation
پسندیدن
اظهار نظر
اشتراک گذاری
