maintenance for automatic cnc pipe end forming machines is a general term for a class of machines, which can be divided into more detailed methods. Generally speaking, it is still used more in industrial construction, and it is also a relatively important machine. So we must have some understanding of its use. Can not know half, half doubt, this is a major taboo in learning. First of all, we should be clear that, as a general rule, It can be divided into hydraulic maintenance for automatic cnc pipe end forming machines and cnc maintenance for automatic cnc pipe end forming machines machines, etc., each has its own characteristics, it has its own scope of use, for everyone, it needs to be serious, can not confuse these types. How to solve maintenance for automatic cnc pipe end forming machines about slow working speed and oil removal.

1. How to speed up the work:

maintenance for automatic cnc pipe end forming machines The general bending speed of the pipe has a fast or slow grade, when the pipe is small, when the pipe is large, use a slow speed, like the above speed regulation method, on the control panel, according to the prompt modification. If you want to solve the problem, it is recommended that you buy a fully automatic CNC, which can process about 1000 tubes a day.

2, hydraulic bending machine in the work down speed fast how to adjust?

The bending machine is 2. 5 meters double cylinder, the falling point of the tool is not the same, the cylinder is newly repaired, not falling cylinder, how to do? Note: Domestic maintenance for automatic cnc pipe end forming machines high intensity work, the service life will be very short, I suggest you look at the imported.

There are two stroke switches next to the machine, one is the height limit, the other is the pressure relief, and the pressure relief will slow down a little.

3, hydraulic maintenance for automatic cnc pipe end forming machines In the work of slow oil feed speed fast oil how to go?

Generally, in the case of relatively cold weather, the oil feed speed will be relatively slow, because the viscosity of the oil is high, so it is slow, and it is good to use an hour, and it is best not to adjust the speed of work and work randomly. If you want to ask why the oil in the tank is slow on the way in and fast on the way out, then you don't know. When working under pressure, the oil in the cylinder is sucked into the cylinder through the large hydraulic control valve, and the valve body is pressurized to work. On the return trip, the oil is returned by the valve body. The oil comes back from the valve group like a flush. The large hydraulic control valve is not together with the valve group, but is hung there in two big boxes on the front side of the fuel tank, so you can only see the surf of the oil return. And can not see the suction oil, suction oil diameter is large, in the front side, you must not touch oh, suction hands.

maintenance for automatic cnc pipe end forming machines https://www.john-sheng.com/CNC-Tube-End-forming